Toyota RAV4 (XA40) 2013-2018 Service Manual: Problem symptoms table

Toyota RAV4 (XA40) 2013-2018 Service Manual / Tire and wheel / Tire pressure warning system / Problem symptoms table

Hint:

Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Toyota RAV4. Problem symptoms table

Test mode procedure

Test mode check Hint: When entering the test mode, the tire pressure warning ecu sets all the test dtcs first. After completing the test mode for each inspection item, the dtcs that ar ...

Terminals of ecu

Check tire pressure warning ecu Disconnect the e56 ecu connector. Measure the voltage and resistance of the wire harness side connector. If the result is not as specified, ther ...

Other materials:

Transmitter id not registered in main mode
Description Inspection procedure Notice: It is necessary to register an id code after replacing the tire pressure warning valve and transmitter and/or the tire pressure monitor ecu (see page tw-9). Hint: Set the tire pressure to the specified value. Standard pressure: 220 kpa (2.2 ...

Components
...

Short in front passenger side - side squib circuit
Description The front passenger side - side squib circuit consists of the center airbag sensor and the front seat side airbag rh. The circuit instructs the srs to deploy when the deployment conditions are met. These dtcs are recorded when a malfunction is detected in the front passenge ...