Hint:
Many state inspection and maintenance (i/m) programs require a vehicle's readiness monitor status to show compl before beginning emission tests.
The readiness monitor will be reset to incmpl (incomplete) if:
If the readiness monitor status shows incmpl, follow the appropriate readiness monitor drive pattern to change the status to compl.
Caution:
Strictly observe posted speed limits, traffic laws, and road conditions when performing these drive patterns.
Notice:
These drive patterns represent the fastest method of satisfying all conditions necessary to achieve complete status for each specific readiness monitor.
In the event of a drive pattern being interrupted (possibly due to factors such as traffic conditions), the drive pattern can be resumed. In most cases, the readiness monitor will still achieve complete status upon completion of the drive pattern.
To ensure completion of the readiness monitors, avoid sudden changes in vehicle load and speed (driving up and down hills and/or sudden acceleration).
Inspection
Inspect no. 1 Chain tensioner
Check that the plunger moves smoothly when the
ratchet pawl is raised with your finger.
Release the ratchet pawl, then check that the
plunger is locked in place by the ratchet pawl and
does not move when pushed with your finger.
Inspect chain ...
Back door lock
Inspection
Inspect back door with motor lock assembly
Apply the battery voltage to the door lock motor and
check the operation of the door lock motor.
Ok
If the result is not as specified, replace the door lock
assembly. ...
Diagnosis system
Description
The ecm controls the function of cruise control on this
vehicle. Data of the cruise control or dtc can be read
from the dlc3 of the vehicle. When trouble occurs with
cruise control, check that the cruise main indicator
does not come on but dtc inspection is performed.
Theref ...