Description
Dtc b1787 is output when the occupant classification ecu receives a collision detection signal sent by the rear occupant classification sensor lh when an accident occurs.
Dtc b1787 is also output when the front seat assembly rh is subjected to a strong impact, even if an actual accident does not occur.
However, when the occupant classification ecu outputs a collision detection signal, even if the vehicle is not in a collision, dtc b1787 can be cleared by performing the zero point calibration and sensitivity check.
Therefore, when dtc b1787 is output, first perform the zero point calibration and sensitivity check.
Wiring diagram
Inspection procedure
Ok: completed is displayed.
Standard value: 27 to 33 kg (59.52 To 72.75 Lb)
Hint
First clear dtcs stored in the occupant classification ecu and then in the center airbag sensor.
Ok: dtc b1787 is not output.
Hint:
Dtcs other than dtc b1787 may be output at this time, but they are not related to this check.
Hint:
Perform the inspection using parts from a normal vehicle if possible.
Ok: completed is displayed.
Standard value: 27 to 33 kg (59.52 To 72.75 Lb)
Hint:
First clear dtcs stored in the occupant classification ecu and then in the center airbag sensor.
Ok: dtc b1787 is not output.
Hint:
Dtcs other than dtc b1787 may be output at this time, but they are not related to this check.
Ok: completed is displayed.
Standard value: 27 to 33 kg (59.52 To 72.75 Lb)
End
Communication malfunction no. 1
Description
This dtc is output when a communication error occurs between the transponder
key amplifier and
transponder key ecu. Some possible reasons for the communication error are: 1) 2
or more ignition keys
are positioned too close together, or 2) noise is occurring in the communicatio ...
Front wiper rubber
Components
Removal
Remove front wiper blade
Detach the claw as shown in the illustration.
Remove the wiper blade as shown in the illustration.
Notice:
Do not fold the wiper arm with the wiper blade
removed. The arm tip may damage the
windshield surface.
Rem ...
List of storage features
Glove box
Bottle holders
Console box
Cup holders
Storage boxes
Caution
Items that should not be left in the storage spaces
Do not leave glasses, lighters or spray cans in the storage spaces, as
this
may cause the following when cabin temperature becomes high:
Glasses may b ...