Toyota RAV4 manuals

Toyota RAV4 Service Manual: Reassembly

  1. V

  1. Attach the 7 outside moulding retainers to install the extension.

Toyota RAV4. Install front bumper extension lh (for wide body)


  1. Install front bumper extension rh (for wide body)

Hint:

Use the same procedures described for the lh side.

  1. Install front bumper hole cover lh (w/o fog light)

  1. Install the bumper hole cover with the fog light mounting bracket and 3 bolts.
  1. Install front bumper hole cover rh (w/o fog light)

Hint:

Use the same procedures described for the lh side.

  1. Install fog light assembly lh

Toyota RAV4. Install fog light assembly lh


  1. Install the fog light mounting bracket with the 3 bolts.
  2. Install the fog light with the screw.
  1. Install fog light assembly rh

Hint:

Use the same procedures described for the lh side.

  1. Install front bumper arm hole cover lh

  1. Install the hook.

Toyota RAV4. Install front bumper arm hole cover lh


  1. Attach the 2 claws and install the hole cover.
  1. Install front bumper arm hole cover rh

Toyota RAV4. Install front bumper arm hole cover rh


Hint:

Use the same procedures described for the lh side.

  1. Install no. 2 Radiator grille lower

  1. Install the radiator grille and attach the 16 claws.

Toyota RAV4. Install no. 2 Radiator grille lower


  1. Install no. 1 Radiator grille lower

Toyota RAV4. Install no. 1 Radiator grille lower


  1. Install the radiator grille and attach the 18 claws.
  1. Install radiator grille sub-assembly

Toyota RAV4. Install radiator grille sub-assembly


  1. Install the radiator grille with the 6 claws.
  2. Install the 4 bolts and 4 nuts.

Toyota RAV4. Install radiator grille sub-assembly


Disassembly
Remove radiator grille sub-assembly Remove the 4 bolts and 4 nuts. Detach the 6 claws and remove the radiator grille. Remove no. 1 Radiator grille lower Detach the 1 ...

Installation
Install front bumper side retainer lh Install the clip and bumper side retainer. Install the bolt. Torque: 6.0 N*m (61 kgf*cm, 53 in.*Lbf) Install front bumper side retainer rh ...

Other materials:

Brake switch "B" circuit high
Description The purpose of this circuit is to prevent the engine from stalling while driving in the lock-up condition when the brakes are suddenly applied. When the brake pedal is depressed, this switch sends a signal to the ecm. Then the ecm cancels the operation of the lock-up clutch ...

Fuel information
You must only use unleaded gasoline in your vehicle. Select octane rating 87 (research octane number 91) or higher. Use of unleaded gasoline with an octane rating lower than 87 may result in engine knocking. Persistent knocking can lead to engine damage. At minimum, the gasoline you use sho ...

System diagram
System diagram (2005/11-2006/01) System diagram (2006/01- ) ...

В© 2011-2024 Copyright www.trav4.net