Toyota RAV4 manuals

Toyota RAV4 Service Manual: Reassembly

  1. Install cooler (solar sensor) thermistor (for automatic air conditioning system)

  2. Install automatic light control sensor (for automatic light control system)

  3. Install front passenger airbag assembly (see page rs-351)

  4. Install no. 2 Instrument panel register assembly

  5. Install no. 1 Instrument panel register assembly

  6. Install no. 3 Heater to register duct

Toyota RAV4. Install no. 3 Heater to register duct


  1. Install the duct with the 2 screws.
  1. Install no. 2 Heater to register duct

Toyota RAV4. Install no. 2 Heater to register duct


  1. Install the duct with the screw.
  1. Install no. 1 Heater to register duct

Toyota RAV4. Install no. 1 Heater to register duct


  1. Install the duct with the screw.
  1. Install no. 2 Side defroster nozzle duct

Toyota RAV4. Install no. 2 Side defroster nozzle duct


  1. Install the duct with the 3 screws.
  1. Install no. 1 Side defroster nozzle duct

Toyota RAV4. Install no. 1 Side defroster nozzle duct


  1. Install the duct with the 3 screws.
Disassembly
Remove no. 1 Side defroster nozzle duct Remove the 3 screws and duct. Remove no. 2 Side defroster nozzle duct Remove the 3 screws and duct. Remove no. 1 Heater to re ...

Installation
Install upper instrument panel Attach the 6 clips and 5 claws to install the instrument panel. Connect the connectors and clamps. Install the 2 bolts and 2 screws. Connect the ...

Other materials:

List screen operation
When a list screen is displayed, use the appropriate buttons to scroll through the list. How to scroll   Select to scroll to the next or previous page. Appears to the right of titles, the complete titles are too long for the display. Select this button to scroll the title. Turn th ...

Defogging the windshield
Set the air outlet selector dial to position. Set the outside/recirculated air mode button to outside air mode if recirculated air mode is used. Perform the following operations accordingly: To adjust the fan speed, turn the fan speed control dial. To adjust the temperat ...

Reassembly
Hint: Thoroughly clean all parts to be assembled. Before installing the parts, apply fresh engine oil to all sliding and rotating surfaces. Replace oil seals with new ones. Install valve stem oil seal Using sst, push in a new oil seal. Sst 09201-41020 Hint: The int ...

В© 2011-2024 Copyright www.trav4.net