Toyota RAV4 (XA40) 2013-2018 Owners Manual: Releasing and stowing the seat belt (for the rear center seat)
- To release the hooked buckle “b”, push the buckle release button.
Release button
- To release the hooked plate A insert the mechanical key Or plate B or the wireless key into the hole on the buckle.
When releasing the seat belt, retract it slowly.
- Stow the plates in the cover.
- Put plate “a” and “b” together, and then stow the plates in the cover.
- Fully insert the plates all the way.
- Push down the plate until a click is heard to lock it.
Fastening the seat belt (for the rear center seat)
Press the plate to release, and
then pull the seat belt.
Push the plate into the buckle in
the order of plate “a” and plate
“b” until a clicking sound is
heard.
...
Adjusting the seat belt shoulder anchor height (front seats)
Push the seat belt shoulder
anchor down while pressing the
release button.
Push the seat belt shoulder
anchor up.
Move the height adjuster up and
down as needed until you hear a
cl ...
Other materials:
Inside rear view mirror
The rear view mirror’s position can be adjusted to enable sufficient
confirmation of the rear view.
Adjusting the height of rear view mirror
The height of the rear view mirror can be adjusted to suit your driving
posture.
Adjust the height of the rear view
mirror by moving it up and down.
...
Data list / active test (2006/01- )
Read data list
Hint:
Using the intelligent tester's data list allows switch,
sensor, actuator and other item values to be read without
removing any parts. Reading the data list early in
troubleshooting is one way to save time.
Connect the intelligent tester (with can vim) to the
...
Vacuum switching valve
Components
Removal
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent airbag and seat belt pretensioner activation.
Remove purge vsv
Disconnect the purge vsv ...
