Toyota RAV4 Service Manual: Removal
- Disconnect cable from negative battery terminal
Caution:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- Remove accelerator pedal rod
- Disconnect the accelerator pedal position sensor connector.
- Remove the 2 bolts and accelerator pedal rod.
On-vehicle inspection
Check accelerator pedal rod
Check the voltage.
Connect the intelligent tester to the dlc3.
Turn the ignition switch on
Turn the intelligent tester on.
Select the menu items: d ...
Installation
Install accelerator pedal rod
Install the accelerator pedal rod with the 2 bolts.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*Lbf)
Connect the accelerator pedal position sensor
connector.
...
Other materials:
Vehicle speed sensor "A"
description
The speed sensor detects the wheel speed and sends the appropriate signals to
the skid control ecu.
The skid control ecu converts these wheel speed signals into a 4-pulse signal
and outputs it to the ecm
via the combination meter. The ecm determines the vehicle speed based o ...
Cooling fan motor
On-vehicle inspection
Inspect no. 1 Cooling fan motor
Disconnect the no. 1 Fan connector.
Connect the battery and ammeter to the no. 1 Fan
motor connector.
Check that the no. 1 Fan rotates smoothly, and then
check the reading on the ammeter.
Standard amperage ...
Operating a bluetooth® enabled portable player
Power
Volume
Search playback
Next commands, random play
or back button
Repeat play
Fast-forwarding, rewinding or
selecting an album
Changing the audio source/
playback
Playback/pause
Previous commands
Selecting a track
Displaying text message
Selecting an album
P ...
