Toyota RAV4 Service Manual: Roof drip side finish moulding

Installation

Hint: Use the same procedures for the rh side and lh side. The procedures listed below are for the lh side. Install front pillar cover sub-assembly upper lh Attach the 3 clips to install ...

Removal

Hint: Use the same procedures for the rh side and lh side. The procedures listed below are for the lh side. Remove roof drip side finish moulding lh Remove the 2 roof drip moulding j ...

Other materials:

Components
(2005/11-2006/01) ...

Front power seat control system
Parts location System diagram Problem symptoms table Hint: Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "suspected area" column of the table. Check each symptom by check ...

Reassembly (2005/11-2006/01)
Install drive shaft bearing case subassembly Using sst and a press, press in the drive shaft bearing case to the inboard joint rh. Sst 09527-10011, 09710-04081 Notice: The bearing should be installed completely. Using a snap ring expander, install a new drive shaft hole ...