Toyota RAV4 Service Manual: Room light assembly
Components
Removal
- Disconnect cable from negative battery terminal
Caution:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- Remove room light lens
- Using a screwdriver, detach the 4 claws and remove the lens.
Hint:
Tape the screwdriver tip before use.
- Remove room light assembly
- Using a screwdriver, detach the 4 claws and remove the 2 covers.
Hint:
Tape the screwdriver tip before use.
- Remove the bulb from the room light switch base.
- Using a screwdriver, detach the 4 claws and remove the light.
Hint:
Tape the screwdriver tip before use.
- Using a screwdriver, detach the 4 claws and remove the room light switch base.
Hint:
Tape the screwdriver tip before use.
Inspection
- Inspect room light
- Connect the battery's positive (+) lead to terminal 1 and the negative (-) lead to terminal 2, and then check that the light comes on when the switch is in the door position.
Ok: light comes on.
If the result is not as specified, replace the light assembly.
- Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, then check that the light comes on when the switch is in the on position.
Ok: light comes on.
If the result is not as specified, replace the light assembly.
Installation
- Install room light assembly
- Attach the 4 claws to install the room light switch base.
- Attach the 4 claws to install the room light.
- Install the bulb to the room light switch base.
- Attach the 4 claws to install the 2 covers.
- Install room light lens
- Attach the 4 claws to install the lens.
- Connect cable to negative battery terminal
Map light assembly
Components
Removal
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent ai ...
Luggage room light
Components
Removal
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent ai ...
Other materials:
Preparations to
use wireless
communication
The following can be performed using bluetooth® wireless communication:
A portable audio player can be operated and listened to via
audio system
Hands-free phone calls can be made via a cellular phone
In order to use wireless communication, register and connect a
bluetooth® device by p ...
Purpose of readiness tests
The on-board diagnostic (obd ii) system is designed to
monitor the performance of emission related components,
and indicate any detected abnormalities with dtc
(diagnostic trouble codes). Since various components
need to be monitored during different driving conditions,
the obd ii syste ...
Child restraint systems with a top tether strap
Secure the child restraint system
using the seat belt or
latch anchors.
Latch the hook onto the anchor
bracket and tighten the top
tether strap.
Make sure the top tether strap is
securely latched.
Laws and regulations pertaining to anchorages
The latch system conforms to fmv ...
