Components
Removal
Caution:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
Hint:
Tape the screwdriver tip before use.
Inspection
Standard resistance
For lh
For rh
If the result is not as specified, replace the switch.
Ok
For lh
For rh
If the result is not as specified, replace the switch.
Ok
If the result is not as specified, replace the switch
Installation
Transmission oil cooler
Components
Removal
Remove transmission oil cooler
*1: Disconnect the no. 3 Water by-pass hose from
the transmission oil cooler.
*2: Disconnect the no. 4 Water by-pass hose from
the transmission oil cooler.
*3: Disconnect the no. 1 Oil cooler inlet hose from
the transmiss ...
Body
General maintenance
Tighten bolts and nuts
Tighten the bolts and nuts on the chassis parts listed
below, if necessary.
Front axle and suspension
Drivetrain
Rear axle and suspension
Brake system
Engine mounting
Other chassis parts
Tighten the bolts and nuts on the bo ...
Seat belt pretensioners (front seats)
The pretensioners help the seat
belts to quickly restrain the occupants
by retracting the seat belts
when the vehicle is subjected to
certain types of severe frontal or
side collision or a vehicle rollover.
The pretensioners do not activate
in the event of a minor frontal
impact, a minor ...