The indicator light comes on.
The seat heaters can be used when
Vehicles without a smart key system
The engine switch is in the “on” position.
Vehicles with a smart key system
The engine switch is in ignition on mode.
When not in use
Turn the seat heater off by returning the switch to its level position. The indicator light turns off.
Caution
Burns
Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns:
Do not cover the seat with anything when using the seat heater.
Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.
Do not use the seat heater more than necessary. Doing so may cause minor burns or overheating.
Notice
To prevent seat heater damage
Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) Into the seat.
To prevent battery discharge
Turn the seat heaters off when the engine is not running.
Center power outlet socket (for ac power supply)
Components
Removal
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent airbag and seat belt pretensioner activation.
Remove console rear end panel (see page ip-
19)
...
Disassembly
Remove no. 3 Heater to register duct
Detach the 6 claws and remove the heater to
register duct.
Remove air duct
Detach the 2 claws and remove the air duct.
Remove air outlet control servo motor
Remove the 3 screws.
Detach the evaporator case from the ...
Cruise control
Summary of functions
Use the cruise control to maintain a set speed without depressing the
accelerator pedal.
Indicators
Cruise control switch
Setting the vehicle speed
Press the “on-off” button to
activate the cruise control.
Cruise control indicator will come
on.
...