Toyota RAV4 manuals

Toyota RAV4 Service Manual: Steering angle sensor communication stop mode

Toyota RAV4 Service Manual / Can communication / Fail-safe chart / Steering angle sensor communication stop mode

Description

Toyota RAV4. Steering angle sensor communication stop mode


Wiring diagram

Toyota RAV4. Steering angle sensor communication stop mode


Inspection procedure

Notice:

Hint:

Operating the ignition switch, any switches or any doors triggers related ecu and sensor communication with the can, which causes resistance variation.

  1. Check can bus line for disconnection (steering angle sensor branch wire)

Toyota RAV4. Check can bus line for disconnection (steering angle sensor branch wire)


  1. Disconnect the e11 steering angle sensor connector.
  2. Measure the resistance of the wire harness side connector.

Standard resistance




  1. Check wire harness (steering angle sensor - battery and body ground)

Toyota RAV4. Check wire harness (steering angle sensor - battery and body ground)


  1. Disconnect the e11 steering angle sensor connector.
  2. Measure the resistance of the wire harness side connector.

Standard resistance


  1. Measure the voltage of the wire harness side connector.

Standard voltage



Replace steering angle sensor

Power steering ecu communication stop mode
Description Wiring diagram Inspection procedure Notice: Turn the ignition switch off before measuring the resistances of the main wire and the branch wire. After the ignition swi ...

Yaw rate sensor communication stop mode
Description Wiring diagram Inspection procedure Notice: Turn the ignition switch off before measuring the resistances of the main wire and the branch wire. After the ignition swi ...

Other materials:

Data list / active test (2006/01- )
Read data list Hint: Using the intelligent tester's data list allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the data list early in troubleshooting is one way to save time. Connect the intelligent tester (with can vim) to the ...

Data list / active test (2005/11-2006/01)
Read data list Hint: Using the intelligent tester's data list allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the data list early in troubleshooting is one way to save time. Connect the intelligent tester (with can vim) to the ...

How to proceed with troubleshooting
Hint: Use these procedures to troubleshoot the lighting system. *: Use the intelligent tester. Vehicle brought to workshop Inspect battery voltage Standard voltage: 11 to 14 v If the voltage is below 11 v, recharge or replace the battery before proceeding. Refer to pr ...

В© 2011-2024 Copyright www.trav4.net