Toyota RAV4 Service Manual: System description
- General
- The air conditioning system has the following features:
- In accordance with the temperature set using the
temperature control switch, the air conditioning
amplifier determines the outlet temperature
based on the input signals from various sensors.
In addition, corrections are made in accordance with the signals from the water temperature sensor to control the outlet air temperature.
- Controls the blower motor in accordance with the airflow volume determined by the air conditioning amplifier based on the input signals from various sensors.
- Automatically changes the outlets in accordance with the outlet mode ratio that is determined by the air conditioning amplifier based on the input signals from various sensors.
- Based on the signals from the ambient temperature sensor, this system calculates the outside temperature and indicates it in the multiinformation display in the combination meter assembly.
- The left/right independent temperature control and neural network control make air conditioner control available to suit the persons in the driver seat and in the passenger seat.
- Turns the rear defogger and outside rear mirror heaters on for 15 minutes when the rear defogger switch is pressed. Turns them off if the switch is pressed while they are operating.
- Checks the sensors in accordance with the operation of the air conditioner switches.
- The air conditioning amplifier has the function of controlling the indicator lighting.
- Mode position and damper operation
- Air outlet and airflow volume
The circle size (..) Indicates the proportion of the flow volume.
System diagram
System diagram (2005/11-2006/01)
System diagram (2006/01- )
...
How to proceed with troubleshooting (2005/11-2006/01)
Hint:
Use these procedures to troubleshoot the air conditioning
system.
*: Use the intelligent tester.
Vehicle brought to workshop
Customer problem analysis and symptom check
...
Other materials:
Automatic
air conditioning system
Air outlets and fan speed are automatically adjusted according
to the temperature setting.
Driver’s side temperature control
dial
Automatic mode button
Micro dust and pollen filter
mode button
Driver’s side temperature setting
display
Fan speed display
Air outlet display ...
On-vehicle inspection
Check front seat side airbag assembly (vehicle not involved in
collision)
Perform a diagnostic system check (see page rs-
49).
With the front seat side airbag installed on the
vehicle, perform a visual check. If any of the defects
mentioned below are present, replace the fron ...
Crankshaft position sensor "A"
Description
The crankshaft position (ckp) sensor system consists of a ckp sensor plate
and a pickup coil.
The sensor plate has 34 teeth and is installed on the crankshaft. The pickup
coil is made of wound copper
wire, an iron core and magnet. The sensor plate rotates and, as each tooth ...
