Toyota RAV4 manuals

Toyota RAV4 Service Manual: Terminals of ecu

  1. Check occupant classification ecu

  1. Measure the voltage of the connector.

Toyota RAV4. Terminals of ecu


Toyota RAV4. Terminals of ecu


Toyota RAV4. Terminals of ecu


Problem symptoms table
Hint: Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "suspected area" column ...

Diagnosis system
Description The occupant classification ecu controls the functions of the occupant classification system on the vehicle. Data of the occupant classification system can be read in the data lin ...

Other materials:

Disassembly (2006/01- )
Remove front axle inboard joint boot no. 2 Clamp One touch type: using a screwdriver, remove the no. 2 Inboard joint boot clamp, as shown in the illustration. Claw engagement type: using needle-nose pliers, remove the no. 2 Inboard joint boot clamp, as shown in the illustra ...

Removal
Caution: Be sure to read the precautionary notices concerning the srs airbag system before servicing it (see page rs-1). Disconnect cable from negative battery terminal Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent air ...

Fuel pump
Components Removal Remove fuel tank assembly Remove the fuel tank (see page fu-39). Remove fuel tank main tube sub-assembly Remove the joint clip and fuel tank main tube. Caution: Before removing the tube joint clip, check for foreign matter around the cli ...

В© 2011-2024 Copyright www.trav4.net