Toyota RAV4 manuals

Toyota RAV4 Service Manual: Terminals of ecu

  1. Check instrument panel junction block (main body ecu)

Toyota RAV4. Check instrument panel junction block (main body ecu)


Toyota RAV4. Terminals of ecu


  1. Disconnect the ib and ie junction block connectors.
  2. Measure the voltage and resistance of the wire harness side connectors.

Toyota RAV4. Terminals of ecu


  1. Reconnect the ib and ie junction block connector.
  2. Measure the voltage of the wire harness side connectors.

Toyota RAV4. Terminals of ecu


Toyota RAV4. Terminals of ecu


Toyota RAV4. Terminals of ecu


Problem symptoms table
Hint: Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "suspected area" column of th ...

Diagnosis system
Description Power door lock control system data can be read in the data link connector 3 (dlc3) of the vehicle. When the system seems to be malfunctioning, use the intelligent tester to check ...

Other materials:

Inspection
Inspect camshaft position sensor Measure the resistance of the sensor. Standard resistance Notice: Cold and hot mean the temperature of the coils themselves. Cold is from -10 to 50°c (14 to 122 °f) and hot is from 50 to 100°c (122 to 212°f). If the result is not as specif ...

Outer mirror switch
Inspection Inspect outer mirror switch assembly The l position of the left/right adjustment switch: measure the resistance of the mirror switch. Standard resistance (for left side) If the result is not as specified, replace the switch assembly. The r position of the left/r ...

Shift solenoid "d" performance (shift solenoid valve s4)
System description The ecm uses signals from the output shaft speed sensor and input speed sensor to detect the actual gear position (1st, 2nd, 3rd or o/d gear). Then the ecm compares the actual gear with the shift schedule in the ecm memory to detect mechanical problems of the shift s ...

© 2011-2024 Copyright www.trav4.net