The blind spot monitor function uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is not reflected in the outside rear view mirror (the blind spot), and advises the driver of the vehicles existence via the outside rear view mirror indicator.
When towing active torque control 4wd vehicles
Use one of the methods shown below to tow the
vehicle.
If the vehicle has trouble in the chassis and drivetrain,
use method 1 (flat bed truck).
Notice:
Do not use any towing method other than those
shown above.
For example, the towing methods shown below are
dangerous or dama ...
Dtc check / clear
Check dtc (using intelligent tester)
Connect the intelligent tester (with can vim) to the
dlc3.
Turn the ignition switch on.
Read the dtcs by following the directions on the
tester screen.
Hint:
Refer to the intelligent tester operator's manual for
further details.
Chec ...
Trouble in passenger airbag on / off indicator
Description
The occupant classification system detects the front passenger seat condition
and then indicates whether
the front passenger airbag is activated or not through the passenger airbag on /
off indicator
illumination.
The passenger airbag on / off indicator illumination changes dep ...