Pull the lever toward you to the center position to turn the high beams off.
You can flash the high beams with the headlights on or off.
Daytime running light system
Headlight control sensor (if equipped)
The sensor may not function properly if an object is placed on the sensor, or anything that blocks the sensor is affixed to the windshield.
Doing so interferes with the sensor detecting the level of ambient light and may cause the automatic headlight system to malfunction.
Automatic light off system
When the light switch is in
or : the lights turn off 30
seconds after
the engine switch is turned to the “lock” position (vehicles without a smart
key system) or off (vehicles with a smart key system) and a door is opened
and all of the doors are closed. (The lights turn off immediately if
on the
key is pressed while all the doors are locked.)
When the light switch is in :
the lights turn off after the engine switch is
turned to the “lock” position (vehicles without a smart key system) or off
(vehicles with a smart key system) and the driver’s door is opened.
To turn the lights on again, turn the engine switch to the “on” position
(vehicles
without a smart key system) or to ignition on mode (vehicles with a
smart key system), or turn the light switch off, then turn it to
or to
.
If any of the doors is kept open and the engine switch is in the “lock” position (vehicles without a smart key system) or off (vehicles with a smart key system), the lights automatically turn off after 20 minutes.
Light reminder buzzer
Vehicles without a smart key system
A buzzer sounds when the engine switch is turned to the “lock” position, the key is removed and the driver’s door is opened while the lights are turned on.
Vehicles with a smart key system
A buzzer sounds when the engine switch is turned off and the driver’s door is opened while the lights are turned on.
Customization
Settings (e.G. Light sensor sensitivity) can be changed.
Notice
To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not running.
Ig2 relay
On-vehicle inspection
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent airbag and seat belt pretensioner activation.
Remove ig2 relay
Remove the no. 1 Engine room re ...
List screen operation
When a list screen is displayed, use the appropriate buttons to
scroll through the list.
How to scroll
Select to scroll to the next
or previous page.
Appears to the right of
titles, the complete titles are
too long for the display. Select
this button to scroll the title.
Turn th ...
Shift lock system
Parts location
System diagram
On-vehicle inspection
Check shift lock operation
Move the shift lever to p.
Turn the ignition switch off.
Check that the shift lever cannot be moved to any
position other than p.
Turn the ignition switch on, depress the brake
pedal and chec ...