Toyota RAV4 Owners Manual: Using the interior lights
Interior lights list
- Interior lights
- Interior/personal lights
- Engine switch light (if equipped)
- Cup holder light (if equipped)
Interior lights
Front
- Off
- Door position
The interior lights come on when a door is opened. They turn off when the doors are closed.
- On
Rear
- Off
- Door position
The interior light comes on when a door is opened. It turns off when the doors are closed.
- On
Personal lights
Turns the light on/off
Illuminated entry system
- Vehicles without a smart key system
The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are open/ closed.
- Vehicles with a smart key system
The lights automatically turn on/off according to engine switch mode, the presence of the electronic key, whether the doors are locked/unlocked, and whether the doors are opened/closed.
To prevent battery discharge
If the following lights remain on when the door is not fully closed and the interior light main switch is in the door position, the lights will go off automatically after 20 minutes:
- Interior light
- Engine switch light (if equipped)
Customization
Setting (e.G. The time elapsed before lights turn off) can be changed.
Voice command system
The voice command system enables the hands-free system to
be operated using voice commands.
Using the voice command system
Press the talk switch.
To cancel the voice command system,
press an ...
Other materials:
Throttle actuator control system
Description
The throttle actuator is operated by the ecm, and opens and closes the
throttle valve using gears. The
opening angle of the throttle valve is detected by the throttle position (tp)
sensor, which is mounted on
the throttle body. The tp sensor provides feedback to the ecm in ord ...
Short in front passenger side pretensioner squib circuit
Description
The front passenger side front pretensioner squib circuit consists of the
center airbag sensor and the front
seat outer belt rh.
This circuit instructs the srs to deploy when the deployment conditions are met.
These dtcs are recorded when a malfunction is detected in th ...
Using the mechanical key (vehicles with a smart key system)
To take out the mechanical key,
push the release button and take
the key out.
The mechanical key can only be
inserted in one direction, as the
key only has grooves on one side.
If the key cannot be inserted in a
lock cylinder, turn it over and reattempt
to insert it.
After using the mec ...
