Toyota RAV4 manuals

Toyota RAV4 Owners Manual: Using the radio

Toyota RAV4. Using the radio


  1. Power
  2. Volume
  3. Adjusting the frequency
  4. Scanning for receivable stations
  5. Am/fm mode button
  6. Station selectors
  7. Seeking the frequency
  8. Displaying text message

Setting station presets

  1. Search for the desired stations by turning the ¢§tune¢escroll¢¸ knob or pressing  on the ¢§seek/track¢¸ button.

  2. Press and hold one of  the station is to
    be set to until you hear a beep.

Scanning radio stations

Scanning the preset radio stations

  1. Press and hold the “scan” button until you hear a beep.

Preset stations will be played for 5 seconds each.

To cancel, press the button again.

  1. When the desired station is reached, press the button again.

Scanning all the radio stations within range

  1. Press the “scan” button.

All the stations with reception will be played for 5 seconds each.

To cancel, press the button again.

  1. When the desired station is reached, press the button again.

Switching the display

Press the “text” button to display or hide the radio texts.

If there are continuing texts, is displayed.


Press the button to display the remaining texts.

When the battery is disconnected

Stations presets are erased.

Reception sensitivity

Notice

To prevent damage, remove the antenna in the following cases

Audio system types
Vehicles with an entune premium audio with navigation Refer to the “navigation and multimedia system owner’s manual”. Vehicles with an entune audio plus Refer to the “navigation ...

Using the cd player
Power Volume Cd eject Selecting a track or displaying track list Searching playback Random play or back button Repeat play Fast-forwarding or rewinding Changing the audio sour ...

Other materials:

Back door lock
Inspection Inspect back door with motor lock assembly Apply the battery voltage to the door lock motor and check the operation of the door lock motor. Ok If the result is not as specified, replace the door lock assembly. ...

Rear shock absorber
Components Removal Hint Use the same procedures for the rh side and lh side. The procedures listed below are for the lh side. Remove rear wheel Remove rear shock absorber assembly lh Support the no. 2 Suspension arm lh with a jack. Notice: Place a wooden or rubber b ...

Turn signal light circuit
Description The turn signal flasher relay (marking: flsh) in the main body ecu turns on when it receives signals from the headlight dimmer switch integrated with the turn signal switch, causing the turn signal lights to flash. Wiring diagram Inspection procedure Check operation of t ...

© 2011-2024 Copyright www.trav4.net