Some audio features can be controlled using the switches on the steering wheel.
Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
Cd mode: selects a track and file (mp3 and wma)
Bluetooth® audio mode: selects a track and album
Ipod mode: selects a song
Usb memory mode: selects a file and folder
Turning on the power
Press the “mode” switch when the audio system is turned off.
Changing the audio source
Press the ¢§mode¢¸ switch when the audio system is turned on. The audio source changes as follows each time the button is pressed. If a mode cannot be used, it will be skipped.
Am fm1 fm2 cd
mode ipod or
usb memory
bluetoothr audio aux
Adjusting the volume
Press the “+” switch to increase the volume and the “-” switch to decrease the volume.
Hold down the switch to continue increasing or decreasing the volume.
Silencing a sound
Press and hold the “mode” switch.
To cancel, press and hold the switch again.
Selecting a radio station
Selecting a track/file or song
Selecting an album
Selecting a folder (mp3 and wma or usb memory)
Caution
To reduce the risk of an accident
Exercise care when operating the audio switches on the steering wheel.
Trailer towing
Your vehicle is designed primarily as a passenger-and-load-carrying
vehicle. Towing a trailer can have an adverse impact on
handling, performance, braking, durability, and fuel consumption.
For your safety and the safety of others, you must not overload
your vehicle or trailer. You must also e ...
Seat belt pretensioners (front seats)
The pretensioners help the seat
belts to quickly restrain the occupants
by retracting the seat belts
when the vehicle is subjected to
certain types of severe frontal or
side collision or a vehicle rollover.
The pretensioners do not activate
in the event of a minor frontal
impact, a minor ...
Unmatched encryption code
Description
This dtc is output when a key with an incomplete key code is inserted into
the ignition key cylinder.
Inspection procedure
Reregister key
Clear the dtc (see page ei-18).
Reregister the key code with the transponder key ecu
(see page ei-5)
Check that the engine ...