Toyota RAV4 Service Manual: Vacuum switching valve
Components
Removal
- Disconnect cable from negative battery terminal
Caution:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- Remove purge vsv
- Disconnect the purge vsv connector.
- Disconnect the wire harness clamp.
- Disconnect the 2 purge line hoses from the purge vsv.
- Remove the purge vsv from the air cleaner hose.
Inspection
- Inspect purge vsv
- Measure the resistance of the purge vsv.
Standard resistance 
If the result is not as specified, replace the purge vsv.
- Check the operation of the purge vsv.
- Check that air does not flow from port e to port f.
- Apply battery voltage across terminals.
- Check that air flows from port e to port f.
If the result is not as specified, replace the purge vsv.
Installation
- Install purge vsv
- Install the purge vsv onto the air cleaner hose.
- Connect the 2 purge line hoses to the purge vsv.
- Connect the wire harness clamp.
- Connect the purge vsv connector.
- Connect cable to negative battery terminal
Canister
Components
removal
Disconnect cable from negative battery
terminal
Caution:
Wait at least 90 seconds after disconnecting the
cable from the negative (-) battery terminal to
prevent ai ...
Ventilation valve
Components
Removal
Remove no. 1 Engine cover (see page em-22)
Remove ventilation valve sub-assembly
Disconnect the ventilation hose from the ventilation
valve.
Using a ...
Other materials:
Installation with latch system
Adjust the seatback to the 8th
lock position from the fully
reclined position.
Fully reclined position
8Th lock position
If your child restraint system interferes with a head restraint and
cannot be installed properly, install the child restraint system after
removing the hea ...
Freeze frame data
Description
Freeze frame data records the engine conditions (fuel
system, calculated load, engine coolant temperature,
fuel trim, engine speed, vehicle speed, etc.) When a
malfunction is detected. When troubleshooting, it can
help determine if the vehicle was running or stopped, the
engin ...
Rear occupant classification sensor lh circuit malfunction
Description
The rear occupant classification sensor lh circuit consists of the occupant
classification ecu and the rear
occupant classification sensor lh.
Dtc b1782 is recorded when a malfunction is detected in the rear occupant
classification sensor lh
circuit.
Wiring diagram
...
