Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Intersection collision warning

Concept

The system may prevent some accidents with cross traffic at intersections and junctions. In the event of an accident, the system may reduce impact speed.

The system sounds a warning in the city speed range before an imminent collision and activates brakes independently, if needed.

General information

The system is controlled by the following sensors:

At intersections and junctions, a warning is issued when a danger of collision with crossing traffic is detected.

The system issues a two-phase warning of a possible risk of collision with vehicles at speeds above approx. 6 mph/10 km/h. The timing of warnings may vary with the current driving situation.

The Driver Attention Camera in the instrument cluster captures the driver's field of vision. Additionally, the system checks for visual impairments.

Field of vision and visibility also affect the timing of the warnings.

Detection range

Vehicles that cross your direction of travel can be detected by the system as soon as these vehicles enter into the detection range of the system.

Safety information

Warning


The system cannot serve as a substitute for the driver's personal judgment in assessing visibility and traffic situation. There is a risk of accident.

Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.

Warning


Indicators and warnings cannot serve as a substitute for the driver's personal judgment. Due to its limits, the system may not issue warnings or reactions, or these may be issued late or in a manner that is not consistent with their normal use. There is a risk of accident. Adjust driving style to traffic conditions. Watch traffic closely and actively intervene where appropriate.

Warning


Due to system limits, individual functions can malfunction during tow-starting/towing with the Intelligent Safety systems activated. There is a risk of accident. Switch all Intelligent Safety systems off prior to tow-starting/towing.

Overview

Button in the vehicle

Button in the vehicle


Intelligent Safety


Camera

Camera


The camera is installed near the interior mirror.

Keep the windshield in front of the interior mirror clean and clear.

Radar sensors

The radar sensors are located in the front bumper.

Radar sensors


Front side bumper.

Radar sensors


Front center bumper.

Keep the radar sensors clean and unobstructed.

Evasion Assistant- Warning with evasion support
Display in the instrument cluster A warning symbol appears in the instrument cluster and in the Head-up Display if a collision with a detected vehicle is imminent. Symbol /Measure Symbol lights up red ...

Intersection collision warning- Switching on/off
Switching on automatically The system is automatically active after every driving off. Switching on manually Press the button. The menu for the Intelligent Safety system is displayed. If all Intelli ...

Other materials:

Front suspension lower no. 1 Arm
Components Removal Remove front wheel Remove hood sub-assembly Remove the hood (see page ed-4). Suspend engine assembly Install the no. 1 And no. 2 Engine hangers with the bolts as shown in the illustration. Torque: 38 n*m (387 kgf*cm, 28 ft.*Lbf) parts no. ...

Removal
Hint: Use the same procedures for the rh side and lh side. The procedures listed below are for the lh side. Remove front pillar cover sub-assembly upper lh Using a moulding remover, detach the 3 clips and remove the pillar cover. ...

Precaution
Precaution for vehicle with srs airbag and seat belt pretensioner Some operations in this section may affect the srs airbags and seat belt pretensioner. Prior to performing the corresponding operations, read the srs airbag notice (see page rs-1). Components ...

В© 2011-2022 Copyright www.trav4.net