Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Rear automatic climate control

Overview

Buttons in the vehicle

Buttons in the vehicle


Climate control functions

Button /Function

Temperature.


Maximum cooling.


AUTO program.


Air flow, manual.


Air distribution, manual


Active seat ventilation


Seat heating


Seat and armrest heating


Switching on/off

Via iDrive

  1. "CAR"
  2. "Settings"
  3.  "Climate control"
  4.  "Rear climate control"

The rear automatic climate control is not ready for operation if the automatic climate control is switched off or if the function for defrosting the windows and removing condensation is active.

Using the button: switching on

Press any button except for the following:

Using the button: switching off

Press and hold the left side of
the button.

Temperature

Concept

The automatic climate control achieves the set temperature as quickly as possible, if needed, by using the maximum cooling or heating capacity, and then keeps it constant.

Adjusting

Turn the wheel to set the
desired temperature.

Do not rapidly switch between different temperature settings. Otherwise, the automatic climate control will not have sufficient time to adjust the set temperature.

Maximum cooling

Concept

The system is set to the lowest temperature, optimum air flow and recirculated-air mode with the drive-ready state switched on.

General information

The function is available with external temperatures above approx. 32 ºF/0 º C and with the drive-ready state switched on.

Switching on/off

Press the button.


The LED is illuminated with the system switched on.

Air flows out of the vents to the upper body region.

The vents need to be open for this.

AUTO program

Concept

Air flow, air distribution and temperature are controlled automatically.

Switching on/off

Press the button.


The LED is illuminated with the AUTO program switched on.

Depending on the selected temperature, the AUTO intensity, and outside influences, the air is directed to the upper body and into the floor area.

Intensity

With the AUTO program activated, the automatic intensity control can be changed:

Press the left or right side of
the button: to decrease or increase intensity.

The selected intensity is shown on the display of the automatic climate control.

Controlling the air flow manually

Concept

The air flow for climate control can be adjusted manually.

General information

To adjust the air flow manually switch off AUTO program first.

Operation

Press the left or right side of
the button: to decrease or increase air flow.

The selected air flow is shown on the display of the automatic climate control.

Controlling the air distribution manually

Concept

The air distribution for climate control can be adjusted manually.

Operation

Press the button repeatedly to
select a program:

BMW Touch Command

Operation of the rear automatic climate control is also possible via BMW Touch Command.

Ventilation
Concept The air flow directions can be individually adjusted. CONTROLS Climate control Adjusting the ventilation General information The air flow directions can be adjusted for direct or indirect ven ...

Parked-car ventilation
Concept The car's interior can be cooled or heated before driving off with the parked-car ventilation. Depending on set temperature and ambient temperature, the car's interior is ventilated or possibl ...

Other materials:

Pressure control solenoid "b" electrical (shift solenoid valve sl2)
Description Shifting from 1st to o/d is performed in combination with the on and off operation of the shift solenoid valves sl1 and sl2, which are controlled by the ecm. If an open or short circuit occurs in any of the shift solenoid valves, the ecm controls the remaining normal shift sol ...

Problem symptoms table
Hint: Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Re ...

Throttle actuator control motor circuit
Description The throttle actuator is operated by the ecm and opens and closes the throttle valve using gears. The opening angle of the throttle valve is detected by the throttle position (tp) sensor, which is mounted on the throttle body. The tp sensor provides feedback to the ecm. This ...

© 2011-2022 Copyright www.trav4.net