Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Tire pressure monitor- Tire conditions

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals / Mobility / Wheels and tires / Tire pressure monitor- Tire conditions

General information

Tire and system status are indicated by the color of the wheels and a SMS text message on the Control Display.

Any existing messages may not be deleted if the displayed target pressure is not reached after the tire inflation pressure is corrected.

All wheels green

One to four yellow wheels

A flat tire or major drop in the tire inflation pressure has occurred in the indicated tires.

Gray wheels

It may not be possible to identify tire inflation pressure losses.

Possible causes:

For tires with special approval: perform a reset

Via iDrive:

  1. "CAR"
  2.  "Vehicle status"
  3. "Tire Pressure Monitor"
  4. Make sure that correct tire settings have been made.

Tire settings

  1. Switch on drive-ready state and do not drive off.
  2.  Reset tire inflation pressure: "Perform reset".
  3.  Drive away.

The wheels are displayed in gray and the following is displayed "Resetting tire pressure...".

After a travel time of several minutes, the set tire inflation pressures are accepted as the target tire inflation pressures. The reset is completed automatically while driving.

After a successfully completed reset, the wheels on the Control Display are shown in green and the following is displayed: "Reset successful." You may interrupt this trip at any time. When you continue the reset resumes automatically.

Messages: for tires without special approval

General information

low tire inflation pressure may cause the DSC Dynamic Stability Control to be switched on.

Safety information

 Warning

A damaged regular tire with low or missing tire inflation pressure impacts handling, such as steering and braking response. Run-flat tires can maintain limited stability. There is a risk of accident. Do not continue driving if the vehicle is equipped with normal tires. Follow the information on run-flat tires and continued driving with these tires.

If a tire inflation pressure check is required

Message

A symbol with a Check Control message appears on the Control Display.

Inflation was not carried out
according to specifications, e.g., the tire has not been sufficiently inflated.

The system has detected a wheel change, but no reset was done.

The tire inflation pressure has fallen below the level of the last reset.

No reset was performed for the system.

The system issues a warning based on the tire inflation pressures stored during the last reset.

Measure

  1. Check the tire pressure and correct as needed.
  2. Perform a system reset.

If the tire inflation pressure is too low

Message

A yellow warning light is
illuminated in the instrument cluster.

In addition, a symbol with a Check Control message appears on the Control Display.

There is a tire inflation
pressure loss.

No reset was performed for the system.

The system issues a warning based on the tire inflation pressures stored during the last reset.

Measure

  1. Reduce the vehicle speed. Do not exceed a speed of 80 mph/130 km/h.
  2. At the next opportunity, for instance at a gas station, check the tire inflation pressure in all four tires and correct if necessary.
  3. Reset the system

If there is a significant loss of tire inflation pressure

Message

A yellow warning light is
illuminated in the instrument cluster.

In addition, a symbol with the affected tire appears in a Check Control message on the Control Display.

There is a flat tire or a major
loss in tire inflation pressure.

No reset was performed for the system.

The system issues a warning based on the tire inflation pressures stored during the last reset.

Measure

  1. Reduce your speed and stop cautiously.

    Avoid sudden braking and steering maneuvers.

  2. Check whether the vehicle is fitted with normal tires or run-flat tires.

    Run-flat tires are labeled with a circular symbol containing the letters RSC marked on the tire's sidewall.

    Run-flat tires

  3. Read the description on What to do in case of a flat tire.

    Actions in the event of a flat tire

Tire pressure monitor
Concept The system monitors tire inflation pressure in the four mounted tires. The system warns you if there is a loss of pressure in one or more tires. General information Sensors in the tire valves ...

Tire pressure monitor- Actions in the event of a flat tire
Normal tires Identify the damaged tire. Check the tire inflation pressure in all four tires, for instance using the tire pressure gage of a flat tire kit. For tires with special approval: when ...

Other materials:

If your vehicle has to be stopped in an emergency
Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure: Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort req ...

Footwell light circuit
Description The main body ecu receives information regarding the door lock position switch and ignition switch, and turns on each foot light. Wiring diagram Inspection procedure Perform active test by intelligent tester (main body ecu) Connect the intelligent tester (with can vim ...

Comfort Access- Touchless unlocking and locking of the vehicle
Concept The vehicle will be unlocked when the driver approaches the locked vehicle with the vehicle key. When the driver walks away from the unlocked vehicle with the vehicle key, the vehicle will be locked. General information The vehicle will be unlocked when an authorized vehicle key is detected ...

В© 2011-2022 Copyright www.trav4.net