Toyota RAV4 manuals

BMW 7 Series (G11/G12) 2015-2022 Owners Manuals: Turn signal

Turn signal in exterior mirror

When driving and during operation of the turn signals or hazard warning system, do not fold in the exterior mirrors, so that the signal lights on the exterior mirror are easy to see.

Using turn signals

Using turn signals


Press the lever past the resistance point.

Triple turn signal activation

Lightly tap the lever up or down.

The triple turn signal duration can be adjusted.

Via iDrive:

  1. "CAR"
  2. "Settings"
  3.  "Exterior lighting"
  4. "One-touch turn signal"
  5. Select the desired setting.

The setting is stored for the driver profile currently used.

Signaling briefly

Press the lever to the resistance point and hold it there for as long as you want the turn signal to flash.

High beams, headlight flasher

Push the lever forward or pull it backward.

High beams, headlight flasher


Parking brake- Automatic Hold
Concept This system assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic. The vehicle is automatically held in place when it is stationary. ...

Wiper system
General information Do not use the wipers if the windshield is dry, as this may damage the wiper blades or cause them to become worn more quickly. Safety information Warning If the wipers start movin ...

Other materials:

Air outlets and air flow
Upper body Upper body and feet Feet Feet and windshield Switching between outside air and recirculated air modes Press  . The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) each time   is pressed. Adjusting the pos ...

Vehicle lift and support locations
Notice about vehicle condition when jacking up vehicle The vehicle must be unloaded before jacking up / lifting up the vehicle. Never jack up / lift up a heavily loaded vehicle. When removing heavy parts such as the engine and transmission, the center of gravity of the vehicle m ...

Torque converter and drive plate
Inspection Inspect torque converter clutch assembly Inspect the one-way clutch. Install sst to the inner race of the one-way clutch. Sst 09350-32014 (09351-32010) Set sst so that it fits in the notch of the converter hub and in the outer race of the oneway clutch. ...

В© 2011-2022 Copyright www.trav4.net